1. FTTH field

Traditional solution use ONU or FDH (Optical Network Unit/Fiber Distribution Hub), when trunk optical cable arrives to outside of mansions and villas. FiberHub can replace ONU or FDH because it has fiber distribution function. Inside, it can be fixed 2-4pcs 1 *8 or 1*16 PLC, and can be put 24pcs fiber splice protection sleeves.

After mating with 1-48F IP67 preassembled waterproof connector, FiberHub" can connect each mansion and villa or low voltage silo directly. It can be fixed outside of mansions and villas, or holding pole installation. FiberHub can reduce signal loss through less connecting node. For in factory preassembled FiberHub, it’s no need high skill operator because of no fiber splice operation. Installation efficiency can be increased by 40%.



2.FTTA field

Traditionally, Remote Radio Unit (RRU) and Building Base band Unit (BBU) connected by optical fiber cable, formed star network topology. Each RRU need one duplex outdoor cable link to BBU. Installation will need more time and cost will be high.
FiberHub work as an Aggregation/Demark box, link RRU and BBU together. From BBU to FiberHub, only need one multi-fiber hybrid cable. Then FiberHub" divide fibers to each RRU through IP67 preassembled waterproof cable assemblies. RRU can get power through assembled power connector on FiberHub.



3.Trunk Cable Connecting

Trunk cable needs to be fusion welded frequently because of each drum cable length limited. So connecting point is weak and need to be protected very well.
When trunk cable comes into FiberHub, it will be sealed and fixed by torsion proof cable gland (plastic or metal type). For 5mm-14mm out diameter cable, FiberHubK has different accessories to fit. Torsion gland can release stress when trunk cable bending and protect fiber avoid breaking. Inside of the FiberHub' main cable and strength member were fixed by fastener, which make sure the box can stand 1200N pulling force long term.
Splice protection sleeve (Max. 24pcs) and PLC (Max.2pcs) can be fixed on the body, which make FiberHub fiber divided very easy. Anti-skid design on the base case, which makes sure FiberHubK holds wire/pole firmly.



4.Prospecting or Military Communication

The cable will be replayed frequently, when prospecting or military communication. Normal connector and cable cannot stand frequently and high strength pulling and reuse. Inside of the FiberHub, armored cable and strength member were fixed by fastener, which make sure the box can stand 1200N pulling force long term. It’s very suitable for field use, especially in star network communications. High strength material and arc interface design make sure FiberHub6 work abnormally when suffer shocks.

Features and Benefits

High compatibility: can be assembled ODVA, Hconn(OptiTap compatible), Mini SC, AARC, PTLC, PTMPO or

Factory-sealed or field assembly

Strong enough: working under 1200N pulling force long term From 2 to 12 ports for single or multifiber harsh connectors

Available with PLC or splice sleeve for fiber divide IP67 waterproof rating,Wall mounting, aerial installation or holding pole installation

* Decreased angle surface and height make sure no connector interfering when operating

Meet I EC 61753-1 standard

Cost effective: save 40% operating time